Computing in Comfort
by Anne Martinez
When setting up a computer workstation, especially at home, we tend to use whatever furniture we have handy. However, making do may cost you more than it saves in the long run, because of decreased productivity and increased medical expenses. The more time you spend in front of the computer, the more important it is to adjust your workstation. Ideally, it should fit like it was made for you.
If you come away from a session at your computer with aching hands or eyes that feel full of sand, you may shrug off your discomforts as an unavoidable consequence of too much time at the keyboard, but the real problem probably is not the quantity of time you spend at the computer. It is more likely caused by your physical positioning at the computer. Here are some tips on how to arrange yourself and your computing environment for optimum health and comfort.
A Desk That Fits
Physical proportions vary widely among individuals, yet we sit at mass-produced, one-size-fits-all desks. Keep in mind that some desks may be designed using a man as a model and may be too big for women.
Working at a desk that is too high off the floor can lead to all sorts of aches and pains, especially in your shoulders and neck. It can also trigger early fatigue and interfere with your ability to concentrate. A desk that is too low can also have physical repercussions, including an aching neck and upper back.
If resting your forearms on your desk causes your shoulders to rise upward, the desk is probably too tall. If your knees continually bump against the underside, even when your feet are flat on the floor, it is probably too short.
To elevate a desk that is too low, place boards or other stable and sturdy braces beneath the legs. Lowering a desk is a bit trickier. One rather permanent method is to use a saw to trim an inch or two from the legs. You can also compensate for a too-tall desk by raising your chair height, but if you do that, be sure to pay attention to the way that affects your overall position. You may need to add a footrest to maintain proper leg position.
Sitting in Style and Comfort
A well-designed chair is worth every penny you spend on it, but only if you take advantage of its capabilities. Ideally, you should be able to independently alter the seat height and angle, back rest, and arm rests.
To properly adjust your chair, begin by raising the height until your knees are around a 90 degree (right) angle and your feet are resting flat on the floor. If the front edge of the seat is running into the backs of your legs, slightly tilt the seat pan (the flat part you sit on) forward to relieve the pressure. It is best if your knees are slightly lower than your hips.
The seat pan can also be moved forward or backward to accommodate differences in leg length. This way, you won't have too much or too little gap between the edge of the seat and the back of your knees.
Your lower back (the lumbar area) has a slight natural forward curve. Raise or lower the backrest until it supports that waist-level curve and allows you to lean back comfortably.
If you have armrests, adjust them to a height just below elbow level. A lower setting may encourage you to slouch down. A higher one is likely to position your shoulders in a perpetual shrug. Do not use the armrests when you type; save them for breaks, instead. If you find yourself relying on the arm rests too often, consider taking them off.
If your chair is too low in relation to your work surface, raise it until your knees are within a few inches of the underside of the desk or work surface. Then use a footrest (a thick book will often do the trick) to elevate your feet until they comfortably rest flat and your knees are returned to about a 90 degree (or greater) angle.
Always test drive a chair before buying it. You cannot tell by reading a catalog how easily a chair will adjust to fit your body shape or how comfortable it really is. Try it out in the store or, even better, ask if you can try it out for a few days.
Place your monitor 1½-2 feet away from your eyes, so that the top of the screen is at eye level. If you've got it sitting on top of your computer's system unit, it's probably too high. Monitor glare is a frequent cause of eyestrain. To avoid it, position your workstation so that your light source isn't directly in front or behind it. If that doesn't alleviate the glare, consider purchasing a glare filter.
Keyboard adjustment is especially important since it helps reduce awkward postures, repetition, and contact stress. Put the keyboard directly in front of you and use it with your shoulders relaxed and elbows close to your body. Your wrists should be straight and aligned with your forearms.
Place your mouse pad where you can reach it without stretching or turning at an awkward angle. Use the mouse pad; it will increase the responsiveness of the mouse and reduce the distance you have to move it. If you spend lots of time using the mouse and find it uncomfortable, consider replacing it with an alternative device such as a trackball or touchpad. As with the keyboard, float over the mouse/trackball, trying not to anchor the wrist to the surface upon which it sits.
These concepts also apply to laptop users. If you do not hook your laptop up to a monitor or other accessories, consider use a laptop stand to elevate the device to the proper height.
It is All About You
Once you have adjusted your workstation, you need to adjust your work habits. Although computer tasks can be very engrossing, it is important to take frequent breaks. Every 10-15 minutes, look away from the computer screen and focus your eyes on something farther away. Do not sit for longer than 2 hours without getting up and stretching, which gets your circulation going and relieves cramped muscles. Consider taking a quick walk around the office to clear your head.
If you share your computer space with someone else, take the time to adjust the furniture and equipment each time you sit down.
Adjusting your workspace may cost a few minutes up front, but it is better to spend those minutes in comfort than in pain and in a healthcare provider's waiting room.
Occupational Safety and Health Administration
The National Institute for Occupational Safety and Health
Canadian Centre for Occupational Health and Safety
Carpal tunnel syndrome. EBSCO DynaMed Plus website. Available at: http://www.dynamed.... Updated September 1, 2017. Accessed November 10, 2017.
Computer workstations eTool. Occupational Safety and Health Administration website. Available at: https://www.osha.gov/SLTC/etools/computerworkstations/more.html. Accessed November 10, 2017.
Easy ergonomics for desktop computer users. California Department of Industrial Relations website. Available at:
...(Click grey area to select URL)
Updated May 2015. Accessed November 10, 2017.
Ergonomics for laptop users. University Health Health Services UC Berkeley website. Available at: https://uhs.berkeley.edu/sites/default/files/laptop.pdf. Accessed November 10, 2017.
Last reviewed November 2017 by EBSCO Medical Review Board Michael Woods, MD, FAAP
Last Updated: 12/23/2015
EBSCO Information Services is fully accredited by URAC. URAC is an independent, nonprofit health care accrediting organization dedicated to promoting health care quality through accreditation, certification and commendation.
This content is reviewed regularly and is updated when new and relevant evidence is made available. This information is neither intended nor implied to be a substitute for professional medical advice. Always seek the advice of your physician or other qualified health provider prior to starting any new treatment or with questions regarding a medical condition.
To send comments or feedback to our Editorial Team regarding the content please email us at firstname.lastname@example.org. Our Health Library Support team will respond to your email request within 2 business days.
All rights reserved.